EEPL manufacture and stock a range of 50mm diameter screw-on stainless steel standoffs for glass. They are designed for back or front screw fixing to a variety of structural materials to provide point fixings to enable the parallel installation of vertical structural glass. Back fixing is by means of a single M12 bolt. Front fixing provision is four M6 machine screws or 6mm woodscrews.
Our 50mm diameter screw-on standoff distances range from 10mm through to 50mm in 10mm increments.
These products are supplied as both Grade 304 stainless steel and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish.
50mm Screw-on Standoffs for 10mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 304 Stainless Steel for indoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 12mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 304 Stainless Steel for indoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 15mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 304 Stainless Steel for indoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 8mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 304 Stainless Steel for indoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 10mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 316 Stainless Steel for outdoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 12mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 316 Stainless Steel for outdoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 15mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 316 Stainless Steel for outdoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
50mm Screw-on Standoffs for 8mm Glass
Designed for Screwing to Timber and Brick Structures
Grade 316 Stainless Steel for outdoor use
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations by Request
