|
|
|
Economy Weld on Glass Bracket
|
|
|
|
|
|
| EEPL manufacture and stock a range of Economy Weld on Glass Brackets for fixing glass panels to balustrades. These products are in 40mm and 50mm wide formats and are intended for budget installations. When compared to the GD40 and GD50 formats, they have a plain drilled hole instead of a countersunk hole, use a machined CSK washer and a stainless steel dome nut instead of an EEPL type glass boss. In other words, they do a fine job structurally but have a less elegant appearance when compared to our more expensive product offerings.
These are available as mild steel glass brackets, grade 304 stainless steel glass brackets and grade 316 stainless steel glass brackets. They can also be supplied with mild steel fixing plates and stainless steel glass bosses. They are intended for welding to conventional balusters.
These products require a 25mm diameter hole in the glass in all cases. These 40mm and 50mm economy glass brackets are designed for 10mm or 12mm toughened glass. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
|
|
|
40mm Economy Weld-on Glass Brackets for 10mm Glass
60mm from Hole Centre to Backface
Choice of Mild Steel, 304 Stainless and 316 Stainless Steel Combinations
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations including Angle Cuts by Request
40mm Economy Weld-on Glass Brackets for 12mm Glass
60mm from Hole Centre to Backface
Choice of Mild Steel, 304 Stainless and 316 Stainless Steel Combinations
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations including Angle Cuts by Request
50mm Economy Weld-on Glass Brackets for 10mm Glass
80mm from Hole Centre to Backface
Choice of Mild Steel, 304 Stainless and 316 Stainless Steel Combinations
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations including Angle Cuts by Request
50mm Economy Weld-on Glass Brackets for 12mm Glass
80mm from Hole Centre to Backface
Choice of Mild Steel, 304 Stainless and 316 Stainless Steel Combinations
Choice of 220/240 Grit Satin or Bright Finishes
Special EPDM Washers to Withstand UV and Water Degradation
Specification Variations including Angle Cuts by Request
|
|
|
|
|
|
|
|
|
|
|
|
