|
|
|
| EEPL manufacture and stock a wide range of glass fixing components for fitting glass panels to balustrades.
Washers include machined mild steel washers and machined stainless steel washers in grades 304 and grade 316. Washers supplied include M8 clearance washers, M10 clearance washers, M12 clearance washers, M16 clearance washers M8 tapped washers, M10 tapped washers, M12 tapped washers, M16 tapped washers, M8 countersunk washers, M10 countersunk washers, M12 countersunk washers and M16 countersunk washers. Stainless steel machined washers are supplied with either 220 grit satin finish or as a bright polished finish.
Glass bosses are supplied in mild steel, grade 304 stainless steel and grade 316 stainless steel. Bosses supplied include M8 glass bosses, M10 glass bosses and M12 glass bosses. Our glass bosses are produced for 8mm, 10mm, 12mm and 15mm glass. Stainless steel glass bosses are supplied with either 220 grit satin finish or as a bright polished finish. Glass bosses are available without drive holes and also with drive holes when they cannot be back fixed.
Glass fixing brackets are supplied in mild steel, grade 304 stainless steel and grade 316 stainless steel. Stainless steel glass fixing brackets are supplied with either 220 grit satin finish or as a bright polished finish.
|
|
|
40mm Diameter M10 Glass Boss With Side Drive Hole
3.5mm Hole in Side of Boss for Tightening
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
40mm Diameter M10 Plain Glass Bosses
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
40mm Diameter M8 Glass Boss With Side Drive Hole
3.5mm Hole in Side of Boss for Tightening
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
40mm Diameter M8 Plain Glass Bosses
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
40mm Diameter Washers
Choice of M8 Tapped Countersunk or Clearance Holes
Choice of Mild 304 Stainless or 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
40mm Standard D Plates
Choice of 60mm or 100mm from Hole Centre to Backface Plates
Choice of Mild Steel 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
All D plates are 6mm thick for use with M8 CSK machine screws
Specification Variations including Angle Cuts by Request
50mm Diameter Clearance Washers
Choice of 8 10 12 or 16mm clearance hole
Choice of Mild 304 Stainless or 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
50mm Diameter CSK Washers
Choice of M8 M10 M12 or M16
Choice of Mild 304 Stainless or 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
50mm Diameter M10 Glass Boss With Side Drive Hole
3.5mm Hole in Side of Boss for Tightening
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
50mm Diameter M12 Glass Boss With Side Drive Hole
3.5mm Hole in Side of Boss for Tightening
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
50mm Diameter M12 Plain Glass Bosses
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
50mm Diameter M8 Glass Boss With Side Drive Hole
3.5mm Hole in Side of Boss for Tightening
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
50mm Diameter M8 Plain Glass Bosses
Choice of Mild 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Finishes
Specification Variations by Request
50mm Diameter Tapped Washers
Choice of M8 M10 or M12
Choice of Mild 304 Stainless or 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
50mm Standard D Plates
Choice of 80mm 100mm or 130mm from Hole Centre to Backface Plates
Choice of Mild Steel 304 Stainless and 316 Stainless Steel
Choice of 220/240 Grit Satin or Bright Polished Finishes
All D plates are 6mm thick for use with M8 CSK machine screws
Specification Variations including Angle Cuts by Request
|
|
|
|
|
|
|
|
|
|
|
|
