|
|
|
Stainless Steel Table Legs
|
|
|
|
|
|
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs. |
|
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL Stainless Steel Legs are a modular system specially designed to satisfy a wide range of functional requirements. Not only that, but EEPL Stainless Steel Legs look good too. EEPL Stainless Steel Legs are intended to be used as Table Legs, Breakfast Bar Support Legs and are also suitable for use in refectories, fast food areas etc.
EEPL Stainless Steel Legs are supplied in two diameters - 60mm and 80mm. These are supplied in two finishes, satin or bright polished. These finish options will match most other stainless steel, chrome and nickel finishes.
EEPL Stainless Steel Legs are supplied as fixed height and adjustable height Stainless Steel Legs. The adjustable height Stainless Steel Legs are supplied with an adjustable stainless steel cup rather than the ugly black plastic moulding as supplied on Far Eastern chrome plated imports. One type of stainless steel cup is radiused so that furniture can be moved around. The other type is designed to be permanently screwed down enabling a strong secure installation. This type has a sharp edge to stop the ingress of food and dirt under the table leg.
EEPL Stainless Steel Legs come with various types of top fixing. The most conventional fixing is a plate fixing and is intended for screwing to wood based worktops etc. It is also suitable for supporting granite and other stone tops. EEPL Stainless Steel Legs can be supplied with two types of glass fixing. The more conventional is designated -GTB. This requires a 20mm diameter hole in the glass and comes with a 60mm diameter or 80mm diameter stainless steel top fixing disc finished to match the Stainless Steel Leg. The other type is designated -GUV and is a stainless steel disc with a highly machined finish. This is for UV bonding to the underside of the glass. This is work that must be carried out by your glass merchant. EEPL also provide a quick release system on 60mm diameter Stainless Steel Table Legs. This system allows the easy installation and removal of table legs.
EEPL 100mm Square Stainless Steel Legs are supplied with a satin brushed finish as standard. They are intended for use both as Stainless Steel Table Legs and as Stainless Steel Breakfast Legs. These Square Table Legs and Square Breakfast Bar Legs are height adjustable -5mm/+10mm against nominal height. The height adjustable base can be screwed to the floor to prevent kick away. These Square Legs are fitted with robust top fixing plates. Please note that our Square Legs are not suitable for applications involving glass.
|
|
|
|
|
|
|
|
|
|
|
|
