Structural Glass Fixings
Our products include weld on glass brackets. These are available as mild steel glass brackets grade 304 stainless steel glass brackets and grade 316 stainless steel glass brackets. They can also be supplied with mild steel fixing plates and stainless steel glass bosses. Our standard GD40 glass brackets are 40mm wide and our GD50 glass brackets are 50mm wide. They are for welding to conventional balusters on horizontal runs. Our GS40 and GS50 glass brackets are longer and are intended for mitre cutting to provide angled brackets for stairways. These products require a 25mm diameter hole in the glass in all cases. Our standard glass brackets are designed for 8mm 10mm or 12mm toughened glass. We can also supply glass brackets for various thicknesses of laminated glass upon request.
Our new GE40 and GE50 Glass Bracket design is a low cost option to the GD40 and GD50 Glass Brackets. This new products used a Dome Nut to terminate the M8 fixing instead of one of our standard Glass Bosses.
EEPL stainless steel standoffs are designed to point fix structural glass panels parallel to and spaced away (standoff distance) from a structural element. Normal standoff distances incrementally range from 10mm through to 100mm. Our stainless steel standoffs for glass are supplied made from grade 304 stainless steel and grade 316 stainless steel and are designed for 8mm 10mm 12mm and 15mm toughened glass. We can supply stainless steel standoffs to enable point fixing of laminated glass too. EEPL can also provide special standoffs for the point fixing of toughened glass up to 25mm thickness.
We also supply other special products including double glass brackets heavy duty 90 degree brackets. Our double brackets and 90 degree brackets are supplied in both inside corner bracket and outside corner bracket formats.
You may also be interested in:
Glass Clamps EEPL stock a range of Glass Clamps for 10mm and 12mm glass in grade 316 Stainless Steel and also in Zinc Alloy.
Handrail Brackets EEPL offer a range of Stainless Steel Handrail Brackets. EEPL offer Wall Fixed Stainless Steel Handrail Brackets Plasterboard Fixed Stainless Steel Handrail Brackets and Glass Fixed Stainless Steel Handrail Brackets.
Weld on Glass Brackets
These are premium quality glass brackets with countersunk screw heads and blind (hidden) screw ends.
They are available as mild steel glass brackets grade 304 stainless steel glass brackets and grade 316 stainless steel glass brackets. They can also be supplied with mild steel fixing plates and stainless steel glass bosses. Our standard GD40 glass brackets are 40mm wide and our GD50 glass brackets are 50mm wide. They are for welding to conventional balusters on horizontal runs. Our GS40 and GS50 glass brackets are longer and are intended for mitre cutting to provide angled brackets for stairways.
EEPL glass brackets require a 25mm diameter hole in the glass in all cases. Our premium glass brackets are designed for fixing glass thicknesses of 8mm 10mm or 12mm. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
Double Brackets for Fixing Flush Glass
EEPL manufacture and stock a range of double brackets for the fixing of flush glass panels.
They are available as mild steel double brackets grade 304 stainless steel double brackets and grade 316 stainless steel double brackets. They can also be supplied with mild steel double plates and stainless steel glass bosses. Our standard GDD40 double brackets are 40mm wide and our GD50 double brackets are 50mm wide.
EEPL double brackets for flush glass require a 25mm diameter hole in the glass in all cases. Our premium glass brackets are designed for fixing glass thicknesses of 8mm 10mm or 12mm. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
Economy Weld on Glass Bracket
EEPL manufacture and stock a range of Economy Weld on Glass Brackets for fixing glass panels to balustrades. These products are in 40mm and 50mm wide formats and are intended for budget installations. When compared to the GD40 and GD50 formats they have a plain drilled hole instead of a countersunk hole use a machined CSK washer and a stainless steel dome nut instead of an EEPL type glass boss. In other words they do a fine job structurally but have a less elegant appearance when compared to our more expensive product offerings.
These are available as mild steel glass brackets grade 304 stainless steel glass brackets and grade 316 stainless steel glass brackets. They can also be supplied with mild steel fixing plates and stainless steel glass bosses. They are intended for welding to conventional balusters.
These products require a 25mm diameter hole in the glass in all cases. These 40mm and 50mm economy glass brackets are designed for 10mm or 12mm toughened glass. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
Weld-on Panel Brackets
EEPL manufacture and stock a wide range of Weld-on Panel Brackets for fixing steel and aluminium panels to balustrades.
We can supply customised Weld-on Panel Brackets to suit most conditions specified by architects and engineers.
Our Weld-on Panel Brackets are supplied in Grades 304 and 316 stainless steels mild steel and mild steel-stainless steel combinations.
Inside Angle & Outside Angle 90 Degree Brackets
EEPL manufacture and stock a range of inside 90 degree brackets and Outside 90 degree brackets for fixing glass to glass at 90 degree internal or external angles.
Our inside 90 degree brackets and outside 90 degree brackets are supplied in both Grade 304 and 316 stainless steels.
EEPL glass brackets require a 25mm diameter hole in the glass in all cases. Our 90 degree brackets are designed for fixing glass thicknesses of 8mm 10mm or 12mm. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
Screw-On 90 Degree Brackets
EEPL manufacture and stock a range of screw on 90 degree brackets for fixing glass at 90 degrees to a structural surface such as brick work concrete or structural timber.
Our screw on 90 degree brackets are supplied in both Grade 304 and 316 stainless steels.
EEPL glass brackets require a 25mm diameter hole in the glass in all cases. Our screw on 90 degree brackets are designed for fixing glass thicknesses of 8mm 10mm or 12mm. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
Type A Screw-on 90 Degree Brackets for Glass
EEPL manufacture and stock a range of grade 304 stainless steel and grade 316 stainless steel screw-on 90 degree brackets for glass. These glass brackets are specially designed for fixing glass to timber balusters and to brick or concrete walls.
These 90 degree brackets for glass have all in one investment cast bodies. The grade 304 stainless brackets are suitable for internal use and the grade 316 stainless brackets are suitable for external use including temperate maritime environments.
EEPL glass brackets require a 25mm diameter hole in the glass in all cases. These 90 degree brackets are designed for fixing glass thicknesses of 8mm 10mm or 12mm. We can also supply glass brackets for various thicknesses of laminated glass up to 13.5mm thickness upon request.
•
30mm Diameter Stainless Steel Vertical and Horizontal Stand-offs
EEPL manufacture and stock a wide range of 30mm diameter stainless steel Stand-offs designed for fixing horizontal glass panels vertical glass panels.
We can supply customised 30mm diameter stainless steel Stand-offs to suit most conditions specified by architects and engineers.
40mm Screw-on Stainless Steel Standoffs for Glass
EEPL manufacture and stock a range of 40mm diameter screw-on stainless steel standoffs for glass. They are designed for back or front screw fixing to a variety of structural materials to provide point fixings to enable the parallel installation of vertical structural glass. Back fixing is by means of a single M10 bolt. Front fixing provision is for two M6 machine screws or 6mm woodscrews.
Our 40mm diameter screw-on standoff distances range from 10mm through to 40mm in 10mm increments.
These products are supplied as both Grade 304 stainless steel and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish.
50mm Screw-on Stainless Steel Standoffs for Glass
EEPL manufacture and stock a range of 50mm diameter screw-on stainless steel standoffs for glass. They are designed for back or front screw fixing to a variety of structural materials to provide point fixings to enable the parallel installation of vertical structural glass. Back fixing is by means of a single M12 bolt. Front fixing provision is four M6 machine screws or 6mm woodscrews.
Our 50mm diameter screw-on standoff distances range from 10mm through to 50mm in 10mm increments.
These products are supplied as both Grade 304 stainless steel and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish.
Long Screw-on Stainless Steel Standoffs for Glass
EEPL manufacture and stock a range of screw-on stainless steel standoffs for glass. They are designed for front screw fixing to a variety of structural materials to provide point fixings to enable the parallel installation of vertical structural glass.
Our standoff distances range from 40mm through to 100mm.
These products are supplied as both Grade 304 stainless and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish
Resin Bond Stainless Steel Standoffs for Glass - 10 to 40mm
EEPL manufacture and stock a range of epoxy resin bond stainless steel standoffs for glass. They are designed for resin fixing to brick and concrete structures to provide point fixings to enable the parallel installation of vertical structural glass.
Our epoxy resin bond Standoff distances range from 10mm through to 50mm.
These products are supplied as both Grade 304 stainless and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish
Resin Bond Stainless Steel Standoffs for Glass - 50 to 100mm
EEPL manufacture and stock a range of epoxy resin bond stainless steel Standoffs for glass. They are designed for resin fixing to brick and concrete structures to provide point fixings to enable the parallel installation of vertical structural glass.
Our epoxy resin bond Standoff distances range from 50mm through to 100mm.
These products are supplied as both Grade 304 stainless and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 220 grit satin finish and bright polished finish
Heavy Duty Resin Bonded Standoffs for 15mm to 25mm Glass
EEPL SB range of epoxy resin bond stainless steel standoffs for glass are extra heavy duty. They are designed for resin bond fixing to brick and concrete structures to provide point fixings to enable the parallel installation of vertical structural glass. The internal M16 structure provides the added strength required for thicker glass specifications.
These epoxy resin bond Standoff distances range from 40mm through to 100mm. The products are designed for glass thicknesses from 15mm to 25mm.
These products are supplied as both Grade 304 stainless and Grade 316 stainless steel standoffs. Grade 316 stainless steel standoffs for glass should always be used in marine environments including tidal estuaries and other environments where there is a potentially corrosive environment.
Standard finishes for our stainless steel standoffs for glass are 240 grit satin finish and bright polished finish. Bright polished finishes have better corrosion resistance particularly when used in marine environments.
Glass Fittings
EEPL manufacture and stock a wide range of glass fixing components for fitting glass panels to balustrades.
Washers include machined mild steel washers and machined stainless steel washers in grades 304 and grade 316. Washers supplied include M8 clearance washers M10 clearance washers M12 clearance washers M16 clearance washers M8 tapped washers M10 tapped washers M12 tapped washers M16 tapped washers M8 countersunk washers M10 countersunk washers M12 countersunk washers and M16 countersunk washers. Stainless steel machined washers are supplied with either 220 grit satin finish or as a bright polished finish.
Glass bosses are supplied in mild steel grade 304 stainless steel and grade 316 stainless steel. Bosses supplied include M8 glass bosses M10 glass bosses and M12 glass bosses. Our glass bosses are produced for 8mm 10mm 12mm and 15mm glass. Stainless steel glass bosses are supplied with either 220 grit satin finish or as a bright polished finish. Glass bosses are available without drive holes and also with drive holes when they cannot be back fixed.
Glass fixing brackets are supplied in mild steel grade 304 stainless steel and grade 316 stainless steel. Stainless steel glass fixing brackets are supplied with either 220 grit satin finish or as a bright polished finish.
